Display Assembly Subcomponents - HP 210 G1 Maintenance And Service Manual

Display assembly subcomponents

NOTE: These procedures are for replacing the display assembly internal components for the HP
210 G1 Notebook PC non-touchscreen, HP 215 G1 Notebook PC non-touchscreen, or HP Pavilion 11
Notebooks non-touchscreen computer models only.
Component
Antenna Kit (includes left and right wireless antenna cables and transceivers)
Display back cover
Display Hinge Kit (includes left and right hinges)
Display panel cable (includes webcam/microphone module cable)
Webcam/microphone module
●
For use with HP Pavilion 11 Notebooks non-touchscreen computer models
●
For use with HP 210 G1 Notebook PC non-touchscreen or HP 215 G1
Notebook PC non-touchscreen computer models
Before removing the display assembly subcomponents, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the display panel (see
7. Remove the display assembly (see
Remove the display assembly subcomponents:
1. If it is necessary to replace the webcam/microphone module:
a. Detach the webcam/microphone module (1) from the display back cover.
56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 40).
Service door on page
Display panel on page
Display assembly on page
Spare part number
744177-001
744178-001
744181-001
744180-001
750667-001
754263-001
41).
49).
53).