HP 610 Printing Manual page 29

display the
Use one of the following methods to open the Toolbox:
toolbox
•
•
•
calibrate your
This option automatically aligns the printheads in your copier/printer.
printer
1
2
3
clean the
Use this feature when the Self-Test Report, which is generated from the front
printheads panel, shows streaking or white lines through any of the colored bars. Do
not clean printheads unnecessarily; this wastes ink and shortens the life of
your printheads.
1
2
3
4
use the services tab
hp digital copier 610 printing and software guide
Click Start, point to Programs or All Programs, point to Hewlett-
Packard, point to hp digital copier, then click Open the HP Toolbox.
Right-click the taskbar icon, if available, then select Open Toolbox.
In an open document, select File, Print, then Properties. In the
Properties dialog box, select the Services tab then click Open the HP
Toolbox.
In the Services tab, click Open the HP Toolbox.
In the Device Services tab, click Calibrate the Device.
Click Calibrate to start the calibration process.
Tip! Although this feature is available in the Services tab, we
recommend that you use the front panel instead.
In the Services tab, click the Open the HP Toolbox icon.
In the Device Services tab, click Clean the Printheads.
On the next screen, click Clean.
A dialog box will appear with the options Immediate Clean or Done.
– If the print quality on the test page is poor, click Immediate Clean.
– If the print quality on the test page is good, click Done.
If you select Immediate Clean, a new test page will print and a new
screen will appear with the options, Prime or Done.
– If the print quality if poor, click Prime.
– If the print quality on the test page is good, click Done.
If you select Prime, a new test page will print and a new screen will
appear with the options Clean Again or Done. Select Clean Again if
further cleaning is needed or click Done.
When you are finished, click Close.
25