Primary Memory Module - HP Compaq 6910p Maintenance And Service Manual

Primary memory module

Description
2048-MB (667-MHz, PC2-5300, 1-DIMM)
1024-MB (667-MHz, PC2-5300, 1-DIMM)
512-MB (667-MHz, PC2-5300, 1-DIMM)
Before removing the primary memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC Adapter from the computer.
Remove the battery (see
4.
Release the keyboard (see
5.
Remove the primary memory module:
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
1.
(The edge of the module opposite the slot rises away from the computer.)
Remove the memory module (2) by pulling the module away from the slot at an angle.
2.
NOTE:
memory module slot.
Reverse this procedure to install the primary memory module.
Battery on page
Keyboard on page
Memory modules are designed with a notch (3) to prevent incorrect installation into the
42).
57).
Component replacement procedures
Spare part number
446430-001
446429-001
446431-001
61