HP 15 Maintenance And Service Manual page 85

Notebook pc
Table of Contents

Advertisement

2.
Remove the two Phillips PM2.5×5.0 screws (5) that secure the system board to the computer.
3.
Lift the right side of the system board (1), and then pull the board away from the computer enough to
disengage the connectors from the side of the base enclosure (2).
NOTE:
Be careful not to inadvertently disconnect the speaker cable when lifting the system board.
4.
Flip the system board upside down to gain access to the speaker connector (1).
Component replacement procedures
77

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compaq 15255 g3256 g3250 g3

Table of Contents