Hard Drive - HP 15 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket.
Description
1-GB, 5400-rpm, 2.5-in
750 GB, 5400 rpm, 2.5 in (for use in HP 250/255 G3 models)
500-GB, 5400-rpm, 2.5-in
320-GB, 5400-rpm, 2.5-in (for use in HP 250 G3 models)
Hard drive bracket
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the top cover (see
To remove the hard drive:
1. Remove the two Phillips PM2.5×5.0 screws (1) that secure the hard drive to the computer.
2. Slide the hard drive to disengage it from the connector (2).
64 Chapter 4 Removal and replacement procedures
Battery on page 49).
Keyboard on page 55).
Top cover on page 58).
Spare part number
676521-001
634250-001
669299-001
622643-001
749648-001