Samsung SMART TV E-Manual page 86

Color Tone: Adjusts the color tone. The setting is applied on an individual
●
Picture Mode
When
Mode is set to Dynamic, users can only choose between
Digital Clean View: Reduces static and ghosting caused by weak signals. This feature is only
●
available for ATV channels. Selecting
screen. Green indicates the best possible signal.
MPEG Noise Filter: Reduces MPEG noise and improves the video quality.
●
HDMI Black Level: This is available only for video input via an HDMI cable. Use this to reduce
●
image retention that may occur when watching video from an external device. Choose one of the
black levels. Try Now
Film Mode: Optimizes the picture quality for movies. Select the mode for watching movies. This
●
feature is only available when watching TV or when the input signal is AV, Component (480i,
1080i), or HDMI (1080i).
Auto Motion Plus: Use this to reduce blur and judder from scenes with rapid movement. If you
●
select Custom, you can configure the afterimage and screen trembling removal ratio and you can
view a sharper image through the
LED TVs.
"
Auto Motion Plus
While
the resolution and frequency of the incoming video signal (60Hz). The displayed frequency is not the
same as the frequency of the picture the TV is displaying when Auto Motion Plus is activated.
Analog Clean View: Reduce diagonal noise in picture cause by the crosstalk of signals. However,
●
This function is available for analog broadcasts.
Cinema Black: In Movie mode, this feature dims the top and bottom areas of the video image
●
to provide a more immersive viewing experience. This function is available for LED 9000 series
models only.
Smart LED: This controls the brightness of individual areas on screen to maximum contrast
●
automatically. This function is not supported depending on the model.
is changed, the corresponding setting will apply automatically. If
Auto Visualization
Try Now
LED Clear Motion
is in effect, select the
Cool and Standard.
displays the signal strength on the
Try Now
function. This feature is only available for
정보표시
button on the virtual remote panel to display
Picture Mode
basis.
Picture
Try Now
Try Now