HP Split 13 x2 PC Maintenance And Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Tablet
  5. Split 13 x2 PC
  6. Maintenance and service manual

HP Split 13 x2 PC Maintenance And Service Manual

Hide thumbs Also See for Split 13 x2 PC:
Table of Contents

Advertisement

Quick Links

HP Split 13 x2 PC
Maintenance and Service Guide
IMPORTANT! This document is intended for HP
authorized service providers only.

Advertisement

Table of Contents
loading

Related Manuals for HP Split 13 x2 PC

Summary of Contents for HP Split 13 x2 PC

  • Page 1 HP Split 13 x2 PC Maintenance and Service Guide IMPORTANT! This document is intended for HP authorized service providers only.
  • Page 2 By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy...
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...

  • Page 5: Table Of Contents

    Table of contents 1 Product description ......................1 2 External component identification ..................4 Finding your hardware and software information ................. 4 Locating hardware ....................4 Locating software ...................... 4 Tablet ............................. 5 Display components ....................5 Edge components ...................... 7 Keyboard base ........................
  • Page 6 Power connector board ................74 Hard drive ....................76 Hinge assembly ..................78 5 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) ........80 Starting Setup Utility (BIOS) ..................... 80 Updating the BIOS ......................... 80 Determining the BIOS version ................... 80...
  • Page 7 Using HP PC Hardware Diagnostics (UEFI) ................82 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ....... 82 6 Specifications ........................83 7 Backing up, restoring, and recovering ................85 Creating recovery media and backups ..................86 Creating HP Recovery media ..................87 Restore and recovery ......................
  • Page 8 viii...

  • Page 9: Product Description

    Product description Category Description Product Name HP Split 13 x2 PC Processor Intel® Core® i5-4202Y 1.60-GHz processor (3.00-MB L3 cache, dual core, 4.5 W) Intel Core i3-4012Y 1.50-GHz processor (3.00-MB L3 cache, dual core, 4.5 W) Chipset Integrated system on chip (SoC) platform controller hub (PCH)
  • Page 10 Category Description Audio and video Integrated HP TrueVision webcamera (2.0 megapixels, FHD, 1080p by 30 frames per second), fixed (no tilt), with activity light Dual array digital microphones with appropriate echo-cancellation and noise- suppression software Two speakers (front-facing) Beats audio...
  • Page 11 Power requirements Support for the following AC adapters: 65-W HP Smart AC adapter (non-PFC, 4.5-mm) ● 65-W HP Smart AC adapter (non-PFC, EM, 4.5-mm) ● Support for a 3-cell, 32-Wh, 2.96-Ah, Li-ion battery for use only in the tablet (includes cable) Support for a 3-cell, 33-Wh, 3.05-Ah, Li-ion battery for use only in the keyboard base...

  • Page 12: External Component Identification

    External component identification Finding your hardware and software information Locating hardware To find out what hardware is installed on your computer: From the Start screen, type c, and then select Control Panel. Select System and Security, and then in the System area, click Device Manager. A list reveals all the devices installed on your computer.

  • Page 13: Tablet

    Internal microphones (2) Record sound. Webcamera light On: The webcamera is in use. HP TrueVision HD Webcamera Records video, captures still photographs, and allows you to video conference and chat online using streaming video. Swipe from the right edge of the TouchPad or TouchScreen to display the charms, tap Search, and then tap the search box.
  • Page 14 For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this guide, from the Start screen, type support, select the HP Support Assistant app, select My computer, and then select User guides. Chapter 2 External component identification...

  • Page 15: Edge Components

    Edge components Item Component Description Power button When the computer is off, press the button to turn on ● the tablet. When the computer is on, press the button briefly to ● initiate Sleep. CAUTION: Pressing and holding down the power button will result in the loss of unsaved information.
  • Page 16 For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this guide, from the Start screen, type support, select the HP Support Assistant app, select My computer, and then select User guides. NOTE: When a device is connected to the jack, the computer speakers are disabled.

  • Page 17: Keyboard Base

    Keyboard base Item Component Description Alignment posts Align and attach the tablet to the keyboard base. Release latch Releases the tablet. To release the tablet, slide the release latch to the left. Docking connector Connects the tablet to the keyboard base. Keyboard base...

  • Page 18: Keys

    Keys Item Component Description Displays system information when pressed in combination with the key (select models only). Executes frequently used system functions when pressed in combination with the key or the key (select models only). Windows key Returns you to the Start screen from an open app or the Windows desktop.

  • Page 19: Lights

    Lights Item Component Description Caps lock light White: Caps lock is on. ● Off: Caps lock is off. ● Mute light Amber: Computer sound is off. ● Off: Computer sound is on. ● Wireless light On: An integrated wireless device, such as a WLAN device and/or a Bluetooth device, is on.

  • Page 20: Touchpad

    TouchPad Item Component Description TouchPad zone Reads your finger gesture to move the pointer or activate items on the screen. Left TouchPad button Functions like the left button on an external mouse. Right TouchPad button Functions like the right button on an external mouse. Chapter 2 External component identification...

  • Page 21: Left Side

    For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this guide, from the Start screen, type support, select the HP Support Assistant app, select My computer, and then select User guides. NOTE: When a device is connected to the jack, the computer speakers are disabled.

  • Page 22: Right Side

    Right side Item Component Description USB 3.0 port Connects optional USB devices, such as a keyboard, mouse, external drive, printer, scanner or USB hub. HDMI port Connects an optional video or audio device, such as a high-definition television, any compatible digital or audio component, or a high-speed HDMI device.

  • Page 23: Illustrated Parts Catalog

    Illustrated parts catalog NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your tablet, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Service tag When ordering parts or requesting information, provide the tablet serial number and model number provided on the service tag.

  • Page 24: Tablet Major Components

    Tablet major components Item Component Spare part number Display assembly: NOTE: The display assembly does not include the display assembly cable. The display assembly cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 23 for more Cable Kit spare part information.
  • Page 25 WWAN module: HP hs3110 HSPA+ Mobile Broadband Module for use on all tablet models 723895-006 HP lt4112 LTE/HPSA+ Mobile Broadband Module for use only on tablet models with 740011-006 model numbers g200 through g299 and g100 through g199 Power button board...
  • Page 26 Item Component Spare part number For use only on tablet models with model numbers f000 through f099: Equipped with an Intel Core i5-4202Y 1.60-GHz processor (3.00-MB L3 cache, 746490-601 dual core, 4.5 W), the Windows 8.1 Professional operating system, and WWAN capability Equipped with an Intel Core i5-4202Y 1.60-GHz processor (3.00-MB L3 cache, 746490-501...
  • Page 27 Item Component Spare part number (13) NFC module (includes double-sided adhesive) 736886-001 NOTE: The NFC module does not include the NFC module cable. The NFC module cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 23 for more Cable Kit spare part information.

  • Page 28: Keyboard Base Major Components

    Keyboard base major components Item Component Spare part number Keyboard/top cover (includes keyboard cable): For use only on tablet models with model numbers f000 through f099: For use in Brazil 765846-201 For use in Canada 765846-DB1 For use in Latin America 765846-161 For use in the United States 765846-001...
  • Page 29 Item Component Spare part number For use in Japan 737219-291 For use in Latin America 737219-161 For use in the Netherlands 737219-B31 For use in Portugal 737219-131 For use in Russia 737219-251 For use in Saudi Arabia 737219-171 For use in South Korea 737219-AD1 For use in Spain 737219-071...
  • Page 30 Item Component Spare part number 3-cell, 33-Wh, 3.05-Ah, Li-ion battery for use only in the keyboard base 723997-006 (includes cable) Bottom cover (includes rubber feet) 736882-001 Chapter 3 Illustrated parts catalog...

  • Page 31: Cable Kit

    Cable Kit Item Component Spare part number Cable Kit, includes: 736883-001 Proximity board cable Webcamera/microphone module cable Power button board cable Volume button board cable TouchScreen board cable NFC module cable Audio/power board cable Docking connector board cable Docking connector board cable (10) Digital card reader board cable (11)

  • Page 32: Mass Storage Devices

    Mass storage devices Item Component Spare part number 500-GB, 5400-rpm, SATA, 5.0-mm hard drive (does not include hard drive 737957-005 bracket, hard drive connector cable, or screws) Hard Drive Hardware Kit, includes: 731424-001 (2a) Hard drive bracket (2b) Hard drive connector cable Screws (not illustrated) Micro-solid-state drive (mSSD): 128-GB mSSD for use on all tablet models...

  • Page 33: Miscellaneous Parts

    Miscellaneous parts Component Spare part number AC adapter 65-W HP Smart AC adapter (non-PFC, 4.5-mm) 710412-001 65-W HP Smart AC adapter (non-PFC, EM, 4.5-mm) 714657-001 USB external DVD±RW Drive 747080-001 HP HDMI-to-VGA adapter 701943-001 HP RJ45-to-USB adapter 539614-001 Power cord (3-pin, black, 1.83-m):...

  • Page 34: Sequential Part Number Listing

    701943-001 HP HDMI-to-VGA adapter 710412-001 65-W HP Smart AC adapter for use on all tablet models (non-PFC, S-3P, 4.5-mm) 710661-006 Intel Dual Band Wireless-AC 7260 802.11 ac 2×2 WiFi + BT 4.0 Combo Adapter for use on all tablet models 710662-006 Intel Dual Band Wireless-AC 3160 802.11ac 1×1 WiFi + BT 4.0 Combo Adapter for use only on...
  • Page 35 Spare part number Description 723997-006 3-cell, 33-Wh, 3.05-Ah, Li-ion battery (for use only in the keyboard base, includes cable) 736879-001 Wireless Antenna Kit (includes left and right wireless antenna cables and transceivers) 736880-001 TouchPad NOTE: The TouchPad does not include the TouchPad cable. The TouchPad cable is included in the Cable Kit, spare part number 736883-001.
  • Page 36 Spare part number Description 736892-001 TouchScreen board (includes double-sided adhesive) NOTE: The TouchScreen board does not include the TouchScreen board cable. The TouchScreen board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 23 for more Cable Kit spare part information.
  • Page 37 Spare part number Description 737219-061 Keyboard/top cover for use only on tablet models with model numbers g200 through g299 and g100 through g199 in Italy (includes keyboard cable and TouchPad) 737219-071 Keyboard/top cover for use only on tablet models with model numbers g200 through g299 and g100 through g199 in Spain (includes keyboard cable and TouchPad) 737219-131 Keyboard/top cover for use only on tablet models with model numbers g200 through g299 and...
  • Page 38 740187-001 RTC battery (includes cable and double-sided adhesive) 741727-001 45-W HP Smart AC adapter for use only on tablet models with model numbers f000 through f099 (non-PFC, RC, 4.5-mm) 746490-001 System board equipped with an Intel Core i5-4202Y 1.60-GHz processor (3.00-MB L3 cache, dual core, 4.5 W), 4-GB of system memory, a graphics subsystem with UMA memory, the Linux...
  • Page 39 Spare part number Description 746490-501 System board equipped with an Intel Core i5-4202Y 1.60-GHz processor (3.00-MB L3 cache, dual core, 4.5 W), 4-GB of system memory, a graphics subsystem with UMA memory, the Windows 8.1 Standard operating system, and WWAN capability for use only on tablet models with model numbers f000 through f099 (includes replacement thermal material) 746490-601 System board equipped with an Intel Core i5-4202Y 1.60-GHz processor (3.00-MB L3 cache,...
  • Page 40 Spare part number Description 765846-201 Keyboard/top cover for use only on tablet models with model numbers f000 through f099 in Brazil (includes keyboard cable and TouchPad) 765846-DB1 Keyboard/top cover for use only on tablet models with model numbers f000 through f099 in Canada (includes keyboard cable and TouchPad) 768185-001 System board equipped with an Intel Core i5-4202Y 1.60-GHz processor (3.00-MB L3 cache,...

  • Page 41: Removal And Replacement Preliminary Requirements

    Removal and replacement preliminary requirements Tools required You will need the following tools to complete the removal and replacement procedures: Flat-bladed screw driver ● Magnetic screw driver ● Phillips P0 screw driver ● Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures.

  • Page 42: Cables And Connectors

    Cables and connectors CAUTION: When servicing the tablet, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the tablet. Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion.

  • Page 43: Grounding Guidelines

    Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions.

  • Page 44: Packaging And Transporting Guidelines

    Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging. ● Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations. ●...

  • Page 45: Equipment Guidelines

    Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps ● with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times.

  • Page 46: Removal And Replacement Procedures

    Removal and replacement procedures NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Tablet component replacement procedures...
  • Page 47 Remove the display assembly screw cover trim piece. The display assembly screw cover trim piece is included with all tablet spare part components. Remove the four Phillips PM2.0×4.0 screws that secure the back cover to the display assembly. CAUTION: Before positioning the tablet with the display screen facing down, make sure the work surface is clear of tools, screws, and any other foreign objects.

  • Page 48: Tablet Battery

    WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement battery provided by HP, or a compatible battery purchased from HP. CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information.

  • Page 49: Proximity Sensor Module

    Remove the tablet battery (5). Reverse this procedure to install the tablet battery. Proximity sensor module Description Spare part number Proximity sensor module 736890-001 NOTE: The proximity sensor module does not include the proximity sensor module cable. The proximity sensor module cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 23 for more Cable Kit spare part information.

  • Page 50: Webcamera/Microphone Module

    Remove the proximity sensor module: Disconnect the proximity sensor module cable (1) from the system board. Remove the Phillips PM2.0×3.0 screw (2) that secures the proximity sensor module to the display assembly. Remove the proximity sensor module (3) and cable. Reverse this procedure to install the proximity sensor module.
  • Page 51 Remove the back cover (see Back cover on page 38). Remove the tablet battery (see Tablet battery on page 40). Remove the webcamera/microphone module: Detach the grounding tape (1) that secures the webcamera/microphone module to the display assembly. Disconnect the webcamera/microphone module cable (2) from the system board. Detach the webcamera/microphone module (3) from the display assembly.

  • Page 52: Micro Solid-State Drive (Mssd)

    micro Solid-state drive (mSSD) Description Spare part number 128-GB mSSD for use on all tablet models 737218-001 64-GB mSSD for use only on tablet models with model numbers g200 through g299 and g100 737217-001 through g199 Before removing the solid-state drive, follow these steps: Turn off the tablet.

  • Page 53: Wlan Module

    Reverse this procedure to install the solid-state drive. WLAN module Description Spare part number For use on all tablet models: Intel Dual Band Wireless-AC 7260 802.11 ac 2×2 WiFi + BT 4.0 Combo Adapter 710661-006 Intel Wireless-N 7260BN 802.11 b/g/n 2×2 WiFi + BT 4.0 Combo Adapter 717384-006 Intel Dual Band Wireless-AC 3160 802.11ac 1×1 WiFi + BT 4.0 Combo Adapter for use only on 710662-006...
  • Page 54 Remove the WLAN module (3) by pulling the drive away from the slot at an angle. NOTE: If the WLAN antenna cables are not connected to the terminals on the WLAN module, protective sleeves should be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module.

  • Page 55: Wwan Module

    Spare part number HP hs3110 HSPA+ Mobile Broadband Module for use on all tablet models 723895-006 HP lt4112 LTE/HPSA+ Mobile Broadband Module for use only on tablet models with model 740011-006 numbers g200 through g299 and g100 through g199 Before removing the WWAN module, follow these steps: Turn off the tablet.
  • Page 56 Remove the WWAN module (3) by pulling the drive away from the slot at an angle. NOTE: If the WWAN antenna cables are not connected to the terminals on the WWAN module, protective sleeves should be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WWAN module.

  • Page 57: Power Button Board

    Power button board Description Spare part number Power button board 736889-001 NOTE: The power button board does not include the power button board cable. The power button board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 23 for more Cable Kit spare part information.

  • Page 58: Rtc Battery

    RTC battery Description Spare part number RTC battery (includes cable and double-sided adhesive) 740187-601 Before removing the system board, follow these steps: Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

  • Page 59: Volume Button Board

    Volume button board Description Spare part number Volume button board (includes cable) 736893-001 NOTE: The volume button board does not include the volume button board cable. The volume button board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 23 for more Cable Kit spare part information.

  • Page 60: Touchscreen Board

    Remove the volume button board (3). Reverse this procedure to install the volume button board. TouchScreen board Description Spare part number TouchScreen board (includes double-sided adhesive) 736892-001 NOTE: The TouchScreen board does not include the TouchScreen board cable. The TouchScreen board cable is included in the Cable Kit, spare part number 736883-001.

  • Page 61: Nfc Module

    Remove the TouchScreen board: Release the two TouchScreen board ZIF connectors (1) and (2) to which the display panel TouchScreen cables are attached, and then disconnect the display panel TouchScreen cables from the TouchScreen board. Release the system board ZIF connector (3) to which the TouchScreen board cable is attached, and then disconnect the TouchScreen board cable from the system board.
  • Page 62 Remove the NFC module: Release the audio/power connector board ZIF connector (1) to which the NFC module cable is attached, and then disconnect the NFC module cable from the audio/power connector board. Release the NFC module ZIF connector (2) to which the NFC antenna cable is attached, and then disconnect the NFC antenna cable from the NFC module.

  • Page 63: Audio/Power Connector Board

    Audio/power connector board Description Spare part number Audio/power connector board 736887-001 NOTE: The audio/power connector board does not include the audio/power connector board cable. The audio/power connector board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 23 for more Cable Kit spare part information.

  • Page 64: Vibrator Module

    Remove the audio/power connector board (5). Remove the audio/power connector board and cable. Reverse this procedure to install the audio/power connector board. Vibrator module Description Spare part number Vibrator module (includes cable) 736901-001 Before removing the vibrator module, follow these steps: Turn off the tablet.

  • Page 65: Docking Connecter Board

    Release the vibrator module (2) from the clip molded into the display assembly. Remove the vibrator module and cable. Reverse this procedure to install the vibrator module. Docking connecter board Description Spare part number Docking connecting board 736888-001 NOTE: The docking connector board does not include the docking connector board cables. The docking connector board cables are included in the Cable Kit, spare part number 736883-001.
  • Page 66 Remove the docking connector board: Disconnect the vibrator module cable (1) from the docking connector board. Release the system board ZIF connector (2) to which the longer docking connector board cable is attached, and then disconnect the longer docking connector board cable from the system board. Detach the two pieces of grounding tape (3) that secure the shorter docking connector board cable to the display assembly.

  • Page 67: Display Panel Cable

    Display panel cable NOTE: The display panel cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 23 for more Cable Kit spare part information. Before removing the display panel cable, follow these steps: Turn off the tablet.

  • Page 68: Card Reader Board

    Card reader board NOTE: The card reader board does not include the card reader board cable. The card reader board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 23 more Cable Kit spare part information. Description Spare part number For use only on tablet models with WWAN capability...

  • Page 69: Speakers

    Remove the card reader board (3) by sliding it forward, making sure to carefully route the card reader board cable through the opening (4) in the display assembly. Reverse this procedure to install the card reader board. Speakers Description Spare part number Speaker Kit (includes left and right speakers and cables) 736899-001 Before removing the speakers, follow these steps:...

  • Page 70: Wireless Antennas

    Docking connector board (see Docking connecter board on page Card reader board (see Card reader board on page Remove the speakers: Release the speaker cables (1) from the retention clips and routing channels built into the display assembly. Remove the two Phillips PM2.0×3.0 screws (2) that secure the speakers to the display assembly. Remove the speakers (3).
  • Page 71 WWAN module (see WWAN module on page Volume button board (see Volume button board on page Remove the wireless antenna cables and transceivers: Disconnect the WLAN antenna cables (1) from the WLAN module. Release the wireless antenna cables from the retention clips (2) and routing channel built into the display assembly.

  • Page 72: System Board

    System board NOTE: The system board spare part kit includes 4-GB of system memory, a graphics subsystem with UMA memory, and replacement thermal material. Description Spare part number For use only on tablet models with model numbers f000 through f099: Equipped with an Intel Core i5-4202Y 1.60-GHz processor (3.00-MB L3 cache, dual core, 4.5 746490-601 W), the Windows 8.1 Professional operating system, and WWAN capability...
  • Page 73 Before removing the system board, follow these steps: Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. Disconnect the power from the tablet by unplugging the power cord from the tablet. Disconnect all external devices from the tablet.
  • Page 74 Remove the system board: Disconnect the following cables from the system board: (1) TouchScreen board cable (2) Proximity sensor module cable (3) Power button board cable (4) Docking connector board cable (5) Audio/power connector board cable (6) Webcamera/microphone module cable (7) Docking connector board cable (8) Display panel cable (9) Card reader board cable...
  • Page 75 Remove the system board (2). Reverse this procedure to install the system board. Removal and replacement procedures...

  • Page 76: Keyboard Base Component Replacement Procedures

    Keyboard base component replacement procedures CAUTION: Keyboard base components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the keyboard base and void the warranty. This chapter provides removal and replacement procedures for authorized service provider only parts. There are as many as 35 screws that must be removed, replaced, and/or loosened when servicing the keyboard base.
  • Page 77 Remove the two Phillips PM2.0×4.0 screws (3) that secure the bottom cover to the keyboard/ top cover. Lift the rear edge of the bottom cover until the left and right sides detach from the keyboard/ top cover. Remove the bottom cover. Reverse this procedure to install the bottom cover.

  • Page 78: Keyboard Base Battery

    WARNING! To reduce potential safety issues, use only the battery provided with the keyboard base, a replacement battery provided by HP, or a compatible battery purchased from HP. CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information.
  • Page 79 Remove the keyboard base battery (4). Reverse this procedure to install the keyboard base battery. Removal and replacement procedures...

  • Page 80: Touchpad

    TouchPad Description Spare part number TouchPad (includes cable) 736880-001 Before removing the TouchPad, follow these steps: Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are off or in Hibernation, turn the tablet on, and then shut it down through the operating system. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the tablet and keyboard base.

  • Page 81: Audio/Usb Board

    Audio/USB board Description Spare part number Audio/USB board (includes audio jack, memory card reader, and USB port) 736894-001 NOTE: The audio/USB board does not include the audio/USB board cable. The audio/USB board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 23 for more Cable Kit spare part information.

  • Page 82: Power Connector Board

    Disconnect the hinge assembly cable (1) from the audio/USB board. Remove the audio/USB board (2) and cable. Reverse this procedure to install the audio/USB board. Power connector board NOTE: The power connector board does not include the power connector board cable. The power connector board cable is included in the Cable Kit, spare part number 736883-001.
  • Page 83 Remove the power connector board: Release the power connector board ZIF connector (1) to which the audio/USB board cable is attached, and then disconnect the audio/USB board cable from the power connector board. Remove the three Phillips PM2.0×3.0 screws (2) that secure the power connector board to the keyboard/top cover.

  • Page 84: Hard Drive

    Hard drive Description Spare part number 500-GB, 5400-rpm, SATA, 5.0-mm hard drive (does not include hard drive bracket, hard drive 737957-005 connector cable, or screws) NOTE: The hard drive bracket, hard drive connector cable, and screws are included in the Hard Drive Hardware Kit, spare part number 736884-001.
  • Page 85 Remove the hard drive (3). If it is necessary to disassemble the hard drive, perform the following steps: Disconnect the hard drive connector cable (1) from the hard drive. Remove the four Phillips PM2.75×4.0 screws (2) that secure the hard drive bracket to the hard drive.

  • Page 86: Hinge Assembly

    Remove the hard drive bracket (3) from the hard drive. The hard drive bracket, hard drive connector cable, and screws are available in the Hard Drive Hardware Kit, spare part number 736884-001. Reverse this procedure to install the hard drive. Hinge assembly NOTE: The hinge assembly spare part kit includes two cables and two rubber feet.
  • Page 87 Remove the hinge assembly: Remove the four Phillips PM2.0×3.0 screws (1) that secure the hinge assembly to the keyboard/ top cover. Remove the hinge assembly (2) and cables. Reverse this procedure to install the hinge assembly. Removal and replacement procedures...

  • Page 88: Using Setup Utility (Bios) And Hp Pc Hardware Diagnostics (Uefi)

    Updating the BIOS Updated versions of the BIOS may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file.

  • Page 89: Downloading A Bios Update

    Do not shut down the computer or initiate Sleep. Do not insert, remove, connect, or disconnect any device, cable, or cord. From the Start screen, type support, and then select the HP Support Assistant app. Click Updates and tune-ups, and then click Check for HP updates now.

  • Page 90: Using Hp Pc Hardware Diagnostics (Uefi)

    Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components.

  • Page 91: Specifications

    Specifications Metric U.S. Dimensions – Tablet 34.00 cm Width 13.39 in 21.60 cm Depth 8.50 in Height 1.11 cm 0.44 in 1.07 kg Weight (lowest weight configuration) 2.36 lb Dimensions – Keyboard base Width 34.00 cm 13.39 in 21.70 cm Depth 8.54 in Height...
  • Page 92 Metric U.S. -15 m to 3,048 m Operating -50 ft to 10,000 ft Nonoperating -15 m to 12,192 m -50 ft to 40,000 ft NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The device operates well within this range of temperatures.

  • Page 93: Backing Up, Restoring, And Recovering

    Backing up, restoring, and recovering Your computer includes tools provided by HP and the operating system to help you safeguard your information and retrieve it if you ever need to. These tools will help you return your computer to a proper working state or even back to the original factory state, all with simple steps.

  • Page 94: Creating Recovery Media And Backups

    After you successfully set up the computer, create HP Recovery media. This step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced.

  • Page 95: Creating Hp Recovery Media

    Creating HP Recovery media HP Recovery Manager is a software program that offers a way to create recovery media after you successfully set up the computer. HP Recovery media can be used to perform system recovery if the hard drive becomes corrupted. System recovery reinstalls the original operating system and the software programs installed at the factory, and then configures the settings for the programs.

  • Page 96: Restore And Recovery

    System Recovery option from the HP Recovery media. For more information, see Recovering using HP Recovery Manager on page If you have replaced the hard drive, you can use the Factory Reset option of HP Recovery media to ● restore the factory image to the replacement drive. For more information, see...

  • Page 97: Using Windows Refresh For Quick And Easy Recovery

    For more information, see Removing the HP Recovery partition on page Using Windows Refresh for quick and easy recovery When your computer is not working properly and you need to regain system stability, the Windows Refresh option allows you to start fresh and keep what is important to you.

  • Page 98: Recovering Using Hp Recovery Manager

    To use the Factory Reset or System Recovery options, you must use HP Recovery media. ● If the HP Recovery media do not work, you can obtain recovery media for your system from the HP ● website. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html.

  • Page 99: Using The Hp Recovery Partition To Recover A Minimized Image (Select Models Only)

    Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly.

  • Page 100: Removing The Hp Recovery Partition

    Select the optical drive or USB flash drive you want to boot from. Follow the on-screen instructions. Removing the HP Recovery partition HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT:...

  • Page 101: Power Cord Set Requirements

    Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC, or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.
  • Page 102 Country/region Accredited agency Applicable note number France Germany Italy Japan METI The Netherlands KEMA Norway NEMKO The People's Republic of China South Korea Sweden CEMKO Switzerland Taiwan BSMI The United Kingdom The United States The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.

  • Page 103: Recycling

    Follow the local laws and regulations in your area for battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle.

  • Page 104: Index

    Index TouchPad 12 drives, preventing damage 34 AC adapter light 14 Window 6 AC adapter, spare part numbers edge components 7 25, 26, 30 Cable Kit electrostatic discharge 35 action key 10 contents 23 equipment guidelines 37 alignment post connectors 8 spare part number 23, 27 esc key 10 alignment posts 9...
  • Page 105 HDMI port 14 microphone Ethernet 2 HDMI-to-VGA adapter, spare part jack 8, 13 external media cards 2 number 25, 26 location 5 graphics 1 headphone jack 8, 13 product description 2 memory module 1 heat sink, spare part number 28 model name 1 microphone 2 hinge assembly...
  • Page 106 removal 44 webcamera/microphone module spare part numbers 17, 24, removal 42 28, 44 spare part number 17, 28, 42 Speaker Kit, spare part number Windows button 6 19, 28, 61 Windows key 10 speakers wireless antenna location 5 location 5 removal 61 removal 62 spare part number 19, 28, 61...

Table of Contents