HP ProBook 4410s Maintenance And Service Manual page 96
Notebook pc
Hide thumbs
Also See for ProBook 4410s:
- Quickspecs (39 pages) ,
- Maintenance and service manual (202 pages) ,
- User manual (30 pages)
Table of Contents
Advertisement
10.
Remove the 21 PM2.5×6.0 screws that secure the top cover to the computer.
11.
Remove the Phillips PM2.0×4.5 screw that secures the top cover to the computer.
12.
Lift the top cover until it disengages from the base enclosure (1). Locations at which the top cover
more securely connects to the base enclosure are indicated by callout (2). If necessary, apply
additional upward pressure at these points to disengage the top cover.
13.
Remove the top cover (3).
Reverse this procedure to install the top cover.
86
Chapter 4 Removal and replacement procedures
Advertisement
Table of Contents
