Memory Module - HP ProBook 4410s Maintenance And Service Manual

Memory module

Description
2-GB (PC2-6400, 800-MHz, DDR2)
1-GB (PC2-6400,800-MHz, DDR2)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover and keyboard (see
Remove the memory module:
1. Position the computer right-side up with the front toward you.
2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
3. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE:
memory module slot.
Reverse this procedure to install a memory module.
Battery on page
Memory modules are designed with a notch (3) to prevent incorrect insertion into the
58).
Switch cover and keyboard on page
Component replacement procedures
Spare part number
536428-001
536427-001
59).
63