HP ProBook 4410s Maintenance And Service Manual page 72

Notebook pc
Hide thumbs Also See for ProBook 4410s:
Table of Contents

Advertisement

6.
Slide the keyboard back toward the display (1), and then rotate it forward (2) until it rests upside-
down on the palm rest.
7.
Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and
disconnect the keyboard cable (2) from the system board.
8.
Remove the keyboard.
Reverse this procedure to install the switch cover and keyboard.
62
Chapter 4 Removal and replacement procedures

Advertisement

Table of Contents
loading

This manual is also suitable for:

Probook 4411sProbook 4510s

Table of Contents