Display Assembly - HP EliteBook 8730w Maintenance And Service Manual

Display assembly

NOTE: All display assembly spare part kits include 3 WLAN antenna transceivers and cables.
Description
17.0-inch, WUXGA+ WVA AntiGlare display assembly without camera module
17.0-inch, WUXGA+ WVA AntiGlare display assembly with camera module
17.0-inch, WSXGA+ WVA AntiGlare display assembly without camera module
17.0-inch, WSXGA+ WVA AntiGlare display assembly with camera module
17.0-inch, WUXGA DreamColor display assembly without camera module
17.0-inch, WUXGA DreamColor display assembly with camera module
17.0-inch, WXGA+ AntiGlare display assembly without camera module
17.0-inch, WXGA+ AntiGlare display assembly with camera module
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the switch cover (see
Remove the display assembly:
1. Turn the computer upside down, with the rear panel toward you.
2. Remove the four Torx T8M2.5×9.0 screws (1) from the rear panel that secure the display assembly
to the computer.
3. Remove the Torx T8M2.5×9.0 screw (2) from the left rear corner of the computer.
70 Chapter 4 Removal and replacement procedures
Battery on page 41).
Keyboard on page 55).
Switch cover on page 59).
Spare part number
494016-001
494017-001
494012-001
494013-001
494014-001
494015-001
494018-001
494019-001