Fan; Graphics Card Heat Sink - HP EliteBook 8730w Maintenance And Service Manual

Fan

Description
Fan
Before removing the fan, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the switch cover (see
Remove the fan:
1. Disconnect the fan cable (1) from the system board.
2. Remove the three PM2.0×3.0 screws (2) that secure the fan to the computer.
3. Lift the fan from the computer (3).
Reverse this procedure to install the fan.

Graphics card heat sink

NOTE: The spare part kit for the graphics card heat sink includes replacement thermal material.
Battery on page 41).
Keyboard on page 55).
Switch cover on page 59).
Component replacement procedures
Spare part number
494000-001
61