Sd Card Application Move; Overview - Ricoh B064 Service Manual

5.5 SD CARD APPLICATION MOVE

Overview

The service program "SD Card Appli Move" (SP5873) copies application programs
from one SD card to a different card.
The machine has three SD card slots. Slots 1 and 2 are used for application
programs, and Slot 3 is used for servicing only.
Three SD cards cannot be used at the same time for applications. If the customer
must use more than two SD cards, more than one application can be stored on the
same SD card.
Important
• The data necessary for authentication is transferred with the application program
to the target SD card.
• Always use a new SD card. Do not use the SD card if it was previously used with
a computer. Correct operation is not guaranteed if this type of SD card is used.
• Keep the SD card in a safe place after you copy the application program from the
card to another card. The SD card is the only evidence that the customer is
licensed to use the application program, and the CE may need to check the SD
card and its data to solve a problem in the future.
• Licensing does not let you copy PostScript data to a different SD card. But, you
can copy an application from an SD card to an SD card that holds PostScript
data.
• Licensing and security restrictions do not let you copy the Data Overwrite
Security B735 application to a different SD card. But, you can copy other data to
the original SD card that holds the B735 application.
• If an SD card was used to combine applications on that card, that SD card
cannot be used for a different function.
SM
SD CARD APPLICATION MOVE
5-27 B064 Series/B140 Series/G126