Log In After Initial Setup; Change The Admin Password - NETGEAR EX6100 User Manual

Log In After Initial Setup

After installation, you can log in to the extender to view or change its settings.

To log in to the extender after the initial setup:
1. Connect a computer or mobile device to the extender's network.
2. Launch a web browser and enter www.mywifiext.net in the address field.
A login screen displays.
3. Enter admin for the user name and password for the password.
If your extender has an Internet connection, the extender automatically checks for new
firmware at the NETGEAR website.
The Status screen displays.

Change the admin Password

The user name to access the extender is admin, and its default password is password.
NETGEAR strongly recommends that you set a more secure password.

To change the password for the extender:
1. On your computer, launch a web browser.
2. In the address field of your browser, enter http://www.mywifiext.net.
AC750 WiFi Range Extender
Manage the Extender Network and Settings
18