NETGEAR EX6200 User Manual page 97

5. Click the Create Network Folder button.
Note: If the Create Network Folder screen does not display, your web
browser might be blocking pop-ups. If it is, change the browser settings
to allow pop-ups.
6. Specify the network folder as described in the following table:
Setting
USB Device
Folder
Share Name
Read Access
Write Access
7. Click the Apply button.
The folder is added on the USB device.
AC1200 WiFi Range Extender
Description
From the USB Device menu, select the USB drive.
Note: If you connect a USB hub to the USB port of the extender, the USB Device
menu can show more than one USB device.
Select a folder:
1. Click the Browse button.
2. Navigate to the folder that you want to select.
3. Click the OK button.
The folder displays in the Folder field.
Type the name of the share.
Select one of the following read access settings:
• All – no password. To read files from the USB device, you do not need to
enter a password. This is the default setting.
• admin. To read files from the USB device, you must enter the password that
you use to log in to the extender.
Select one of the following write access settings:
• All – no password. To write files to the USB device, you do not need to enter
a password. This is the default setting.
• admin. To write files to the USB device, you must enter the password that
you use to log in to the extender.
Share a USB Drive That Is Attached to the Extender
97