Back Up Windows Computers With Readyshare Vault - NETGEAR EX6200 User Manual


To access the USB drive from a Windows computer:
1. Select Start > Run.
2. Enter \\readyshare in the dialog box.
3. Click the OK button.

To map the USB device to a Windows network drive:
1. Visit www.netgear.com/readyshare.
2. In the ReadySHARE USB Storage Access pane, click the PC Utility link.
The readyshareconnect.exe file is downloaded to your computer.
3. Launch readyshareconnect.exe.
4. Select the drive letter to map to the network folder.
5. If you want to connect to the USB drive as a different user, do the following:
a. Select the Connect using different credentials check box.
b. Type the user name and password.
c. Click the OK button.
6. Click the Finish button.
The USB drive is mapped to the drive letter that you specified.

Back Up Windows Computers with ReadySHARE Vault

Your extender comes with free backup software for all the Windows computers in your home.
Connect a USB hard disk drive (HDD) to the USB port on your extender for centralized,
continuous, and automatic backup.
AC1200 WiFi Range Extender
Share a USB Drive That Is Attached to the Extender
89