View The Wired And Wifi Network Devices - NETGEAR EX6200 User Manual

The following table describes the traffic statistics fields that display for each of the five
LAN ports, for the WLAN1 port in the 2.4 GHz band, and for the WLAN2 port in the 5 GHz
band.
Field
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
6. To change the poll interval:
a. Click the Stop button.
b. In the Poll Interval field, enter a new value in seconds.
c. Click the Set Interval button.

View the Wired and WiFi Network Devices

You can view the active wired and WiFi devices in both the network to which the extender is
connected and the extender network. If you do not recognize a WiFi device, it might be an
intruder.

To display the wired and WiFi devices:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter www.mywifiext.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
AC1200 WiFi Range Extender
Description
The link status and speed of the port.
The number of packets transmitted on the port since the extender was restarted.
The number of packets received on the port since the extender was restarted.
The number of collisions on the port since the extender was restarted.
The packet transmission rate in bytes per second on the port.
The packet reception rate in bytes per second on the port.
The time elapsed since the connection was initiated.
Maintain and Monitor the Extender
85