Use The Restore Factory Settings Button; Erase The Extender Configuration Settings - NETGEAR EX6200 User Manual

Use the Restore Factory Settings Button

CAUTION:
This process erases any settings that you have configured in the extender.

To reset the extender to factory default settings:
1. Insert a straightened paper clip into the hole of the Restore Factory Settings button
and hold it for about seven seconds.
2. Release the button.
The extender resets and restarts. This process takes about one minute.

Erase the Extender Configuration Settings

CAUTION:
This process erases any settings that you have configured in the extender.

To erase the extender's settings:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter www.mywifiext.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
AC1200 WiFi Range Extender
Restore Factory Settings button
Maintain and Monitor the Extender
79