Return The Extender To Its Factory Default Settings - NETGEAR EX6200 User Manual

4. Select extender Maintenance > Backup Settings.
5. Click the Browse button.
6. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_EX6200.cfg.
CAUTION:
After you click the Restore button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
7. Click the Restore button.
A confirmation pop-up screen displays.
8. Confirm your decision.
The extender restarts. This process takes about one minute.

Return the Extender to Its Factory Default Settings

Under some circumstances (for example, if you have lost track of the changes that you made
to the extender settings), you might want to erase the configuration and reset it to factory
default settings.
To reset the extender to factory default settings, you can use either the Restore Factory
Settings button on the rear panel or the Erase function. However, if you have lost the
password to access the extender, you must use the Restore Factory Settings button.
For a list of factory default settings, see
AC1200 WiFi Range Extender
Factory Default Settings
Maintain and Monitor the Extender
78
on page 120.