NETGEAR EX6200 User Manual page 68

4. Select Advanced > Operating Mode.
5. By default, the Internet Surfing radio button is selected.
6. Select the FastLane Technology radio button.
7. Select the FastLane Technology option that you want to enable by selecting one of the
following radio buttons:
• Device-to-extender in 5GHz only and extender-to-router in 2.4GHz only.
Your WiFi devices must support the 5 GHz band.
• Device-to-extender in 2.4GHz only and extender-to-router in 5GHz only (Router
must support 5GHz band).
Your WiFi router must support the 5 GHz band. This option is enabled by default.
8. Click Apply.
Your settings are saved.
9. If you are disconnected, reconnect your WiFi device to the extender's network with its new
settings.
For example, if you were connected to the extender's network in the 2.4 GHz band, you
now might have to connect in the 5 GHz band, or the other way around.
Manage the Extender Network and Security Settings
AC1200 WiFi Range Extender
68