NETGEAR EX6200 User Manual page 56

The process to configure WEP security is the same for the 2.4 GHz and 5 GHz bands.

To set up WEP:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter www.mywifiext.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4. Select Settings > Wireless.
5. Scroll down to either the Security Options (2.4GHz) section (shown in the following figure) or
the Security Options (5GHz) section, and select the WEP radio button.
6. From the Encryption Strength menu, select the encryption strength setting:
• 64 bit. Requires an encryption key of 10 hexadecimal digits (any combination of 0–9,
a–f, or A–F) or a string of five characters.
• 128 bit. Requires an encryption key of 26 hexadecimal digits (any combination of
0–9, a–f, or A–F) or a string of 13 characters.
7. Specify the active key by selecting the Key 1, Key2, Key3, or Key 4 radio button.
Only one key can be the active key.
AC1200 WiFi Range Extender
Manage the Extender Network and Security Settings
56