Use Wps With The Pin Method - NETGEAR EX6200 User Manual

3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4. Select Add WPS Client.
The screen displays a description of the WPS method.
5. Click the Next button.
By default, the Push Button (recommended) radio button is selected.
6. Either click the
extender.
Both Link Rate LEDs
minutes.
For two minutes, the extender attempts to find the WiFi device (that is, the client) that you
want to join the extender's WiFi network.
7. Within two minutes, go to the WiFi device and press its WPS button (to join the extender's
WiFi network without entering a password.
8. To verify that the WiFi device is connected to the extender's WiFi network, select
Maintenance > Attached Devices.
The WiFi device displays onscreen.

Use WPS with the PIN Method

To use the PIN method to connect a WiFi device to the extender's WiFi network, you must
know the PIN of the WiFi device that you are trying to connect.

To let a WiFi device join the extender's WiFi network using WPS with the PIN method:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter www.mywifiext.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4. Select Add WPS Client.
AC1200 WiFi Range Extender
button onscreen or press the WPS button on the rear panel of the
and the Device to Extender LED
Manage the Extender Network and Security Settings
47
blink green for two