Connect The Extender To A Wifi Network Without Using Smart Setup - NETGEAR EX6200 User Manual

You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4. Select Maintenance > Set Password.
5. Select the Enable Password Recovery check box.
6. Select two security questions and provide answers to them.
7. Click the Apply button.
Your changes are saved.
Connect the Extender to a WiFi Network Without Using
Smart Setup
If you want to change the extender connection to another WiFi network, you can do so
without using NETGEAR genie Smart Setup.
Note: You cannot use the following procedure to change the network names
or security options for your extender WiFi networks. For information
about how to change these settings, see
Settings

To change the extender connection to another WiFi network without using Smart
Setup:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter www.mywifiext.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
AC1200 WiFi Range Extender
on page 49.
Manage the Extender Network and Security Settings
Manage the Extender WiFi
39