NETGEAR EX6200 User Manual page 31

11. Enter the security settings for the existing 5 GHz network:
• If the network uses WPA-PSK, WPA2-PSK, or a combination of these options, do the
following:
a. In the Password (network key) field, type the network passphrase (also called
a password or network key).
b. Click the Continue button.
• If the network uses WEP, do the following:
a. From the Encryption Strength menu, select the encryption strength (64 bit or
128 bit).
b. Select the radio button that corresponds to the key that you want to use (Key 1,
Key 2, Key 3, or Key 4).
c. Next to the selected radio button, enter the network WEP key.
d. Click the Continue button.
Smart Setup displays the network names and adds _2GEXT to the end of the 2.4 GHz
network name and _5GEXT to the end of the 5 GHz network name.
AC1200 WiFi Range Extender
Get Started
31