NETGEAR EX6200 User Manual page 28

You can use any of the five Ethernet LAN ports of the extender.
CAUTION:
Do not use an Ethernet cable to connect the extender to a WiFi router. If
you do so, the extender does not work because it is designed to use only a
WiFi connection to a WiFi router.
6. If you have trouble connecting, try the following:
• Wait a couple of minutes.
If you start your computer, connect the Ethernet cable to the extender, and launch
your browser quickly, the computer might still need a couple of minutes to recognize
the Ethernet LAN connection before you can connect.
• Make sure that your Ethernet cable is securely connected to the extender and the
computer, and that the extender Device to Extender Connection LED lights.
If the LED is not lit, reconnect the Ethernet cable, and relaunch your Internet browser.
7. Open a web browser window from the same computer.
The browser takes you directly to the NETGEAR genie Smart Setup start screen.
Note: If you are not automatically directed to the NETGEAR genie Smart
Setup start screen, go to www.mywifiext.net, and enter admin for the
user name and password for the password.
AC1200 WiFi Range Extender
Get Started
28