NETGEAR EX6200 User Manual page 23

b. Select the radio button that corresponds to the key that you want to use (Key 1,
Key 2, Key 3, or Key 4).
c. Next to the selected radio button, enter the network WEP key.
d. Click the Continue button.
Smart Setup displays the network names and adds _2GEXT to the end of the 2.4 GHz
network name and _5GEXT to the end of the 5 GHz network name.
11. Use the default extension names, or, in the Name (2.4GHz SSID) field, and, if you have set
up a 5 GHz network, in the Name (5GHz SSID) field, enter new network names for your
extender WiFi networks, and click the Continue button.
Note: If you do not want to use the same security modes for your extender
networks as you use for your existing networks, clear the check box
before you click the Continue button. You then can configure the
security settings for the extender networks. However, you can also
change the security settings later.
The extender applies the settings.
12. Wait a couple of minutes while the extender creates the WiFi networks.
AC1200 WiFi Range Extender
Get Started
23