Factory Default Settings - NETGEAR EX6200 User Manual

Factory Default Settings

To reset the extender to factory default settings, you can use either the Restore Factory
Settings button on the rear panel or the Erase function. For more information, see
Extender to Its Factory Default Settings
The following table shows the factory default settings.
Table 2. Factory default settings
Factory Settings
Smart Setup
WiFi WiFi communication
WiFi network name (SSID)
Security
Transmission speed
Country/region
Operating mode
Data rate in the 2.4 GHz band
Data rate in the 5 GHz band
DHCP
1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.
AC1200 WiFi Range Extender
on page 78.
Enabled
Enabled
NETGEAR_EXT
Disabled
1
Auto
Varies by region
802.11ac, 802.11n, 802.11g, 802.11b
Up to 150 Mbps
Up to 867 Mbps
Client enabled
Factory Settings and Technical Specifications
120
Return the