Change NETGEAR USB Control Center Settings
You can stop the NETGEAR USB Control Center from starting automatically when you log in
to Windows. You can also change the language and specify the time-out to release the
connection to the USB printer that is connected to the extender.
To turn off automatic NETGEAR USB Control Center startup:
1.
Launch the NETGEAR USB Control Center.
2.
Select Tools > Configuration.
3.
Clear the Automatically execute when logging on Windows check box.
4.
Click the OK button.
Your changes are saved.
To change the language:
1.
Launch the NETGEAR USB Control Center.
2.
Select Tools > Configuration.
3.
In the Language list, select a language.
4.
Click the OK button.
The next time NETGEAR USB Control Center starts, the language changes.
To specify the time-out:
1.
Launch the NETGEAR USB Control Center.
2.
Select Tools > Configuration.
3.
In the Timeout field, type the number of minutes.
The time-out period is the number of minutes that a computer holds its connection to the
USB printer when the connection is not being used.
4.
Click the OK button.
Your changes are saved.
AC1200 WiFi Range Extender
Share a USB Printer Through the Extender
113