Rear Panel Ports, Buttons, And Connector; When To Use Your Extender - NETGEAR WN2000RPT User Manual

Rear Panel Ports, Buttons, and Connector

The following figure shows the ports, buttons, and connector on the rear panel of the
extender. The rear panel also shows the default access information, MAC address, and serial
number of the extender.
Figure 2. Rear panel

When to Use Your Extender

NETGEAR recommends that you connect to the extender only when your existing home
network connection is poor. Data traffic routed through the extender is inherently slower than
traffic routed directly from the network.
NETGEAR recommends that you connect through the extender network only when the WiFi
device is in a "dead zone" where connection from the existing network is poor or nonexistent.
N300 WiFi Range Extender WN2000RPT
Restore Factory Settings button
Ethernet LAN ports
Power connector
On/Off button
Overview
8