System Board And System Board Frame - HP EliteBook 8530p Maintenance And Service Manual

3. Disconnect the modem module cable (3) from the system board.
Reverse this procedure to install the modem module.

System board and system board frame

NOTE: All system board spare part kits include replacement thermal material. The Thermal Material
Kit is also available using spare part numbers 413706-001 (for use in all countries or regions except
Japan and Asia countries and regions) and 445853-001 (for use only in Japan and Asia Pacific countries
and regions).
Description
For use with HP EliteBook 8530w computer models with Quad Core
For use with HP EliteBook 8530w computer models with Core Duo
For use with HP EliteBook 8530p computer models
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Fan (see
84 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Fan on page 60)
45).
49)
52)
56)
Spare part number
500906-001
500905-001
500907-001