Replacing Or Upgrading The Hard Drive; Removing The Hard Drive - HP Laptop User Manual

4. With the battery bay toward you, slide the service door release latch to the left (3), and if you
choose to, insert and tighten the optional screw (4) to hold the service door in place. Slide the
release latch to the right to lock the service door (5).
NOTE:

Replacing or upgrading the hard drive

CAUTION:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off, turn the computer on by pressing the power button.
Then shut down the computer through the operating system.

Removing the hard drive

To remove a hard drive:
1. Save your work and shut down the computer.
2. Disconnect AC power and external devices connected to the computer.
3. Turn the computer upside down on a flat surface.
4. Remove the service door (see
5. Remove the battery (see
If you do not want to use the optional screw, it is stored inside the service door.
To prevent information loss or an unresponsive system:
Removing a battery on page
Removing the service door on page 52).
42).
Using hard drives 53