Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
Description
500-GB, 7200-rpm hard drive
500-GB, 5400-rpm hard drive
320-GB, 7200-rpm hard drive
250-GB, 7200-rpm hard drive
160-GB, 7200-rpm hard drive
160-GB, 7200-rpm hard drive (Seagate only)
160-GB, 5400-rpm hard drive
128-GB solid-state drive (SSD)
HP Intel 80-GB solid-state drive
80-GB solid-state drive
Hard drive hardware kit (includes rails and screws)
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the
computer.
Battery on page
45).
Spare part number
634924-001
634632-001
603783-001
495059-001
483186-001
580297-001
514071-001
574721-001
636545-001
501113-001
634022-001
Component replacement procedures
51