HP EliteBook 8530p Maintenance And Service Manual page 103

h. Heat sink (see
i. Modem module (see
j. System board (see
Remove the ExpressCard assembly:
1. Turn the system board upside-down, with the front toward you.
2. Remove the four Phillips PM2.0×5.0 screws that secure the ExpressCard assembly to the
system board.
3. Detach the slots on the ExpressCard assembly from the tabs on the ExpressCard connector (1).
4. Remove the ExpressCard assembly (2).
Reverse this procedure to install the ExpressCard assembly.
Heat sink on page 83)
Modem module on page
System board on page
64)
90)
Component replacement procedures 95