Continuous Measurement With Crc (Arc); Start Verification Command (Av) - Vaisala WXT510 User Manual

Chapter 7 ___________________________________________________ Getting the data messages
VAISALA________________________________________________________________________ 55
Continuous measurement with
CRC (aRC)
aRCx!
Command format:
Has the same function than the Continuous measurement command
aRx but a three character CRC is added to the response data strings
before <cr><lf>.
Example (device address 0):
0RC3!0+0.04+10+14.8+0.0+0+0.0INy

Start verification command (aV)

This command is used to query self diagnostic data from the device.
However, the command is not implemented in the WXT510. The self-
diagnostic data can be requested with aM5 command.