Removing The Heatsink (With Fan) (Hp Authorized Service Providers Only); Figure 2-13. Removing The Heatsink - HP 6000 Service Manual

Removing the Heatsink (with Fan)
(HP Authorized Service Providers Only)
Required Equipment
Small Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery. Remove the secondary battery if one is
installed.
2. Remove these additional assemblies:
Power button panel (page 2-11).
Keyboard (page 2-15).
3. Disconnect the fan cable through the opening in the heatsink.
4. Remove the five retaining screws.
5. Lift the heatsink out of the unit.
Screws, M2.5×6mm (5)
Omnibook 6100
heatsink
Screw, M2.5×4mm
See the Caution
on next page
before reinstalling.
HP Omnibook 6000/6100
Screws, M2.5×6mm (4)

Figure 2-13. Removing the Heatsink

Omnibook 6000
heatsink
Fan cable
Fan cable socket
Removal and Replacement 2-17