Removing The Power Button Panel (User-Replaceable); Figure 2-9. Removing The Power Button Panel - HP 6000 Service Manual

Removing the Power Button Panel
(User-Replaceable)
Required Equipment
Small flat-blade screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery. Remove the secondary battery if one is
installed.
2. Carefully insert the screwdriver blade under the power button panel along the edge shown below,
and gently pry up the center of the cover.
3. Insert a thumb or finger under the center of the panel, and lift the panel out.
Reassembly Notes
Insert the left end of the panel into the top case, and press the panel into place.
HP Omnibook 6000/6100

Figure 2-9. Removing the Power Button Panel

Removal and Replacement 2-11