Behringer Digital Snake S16 Quick Start Manual page 9

I/o box with 16 remote-controllable mic/line inputs, 8 outputs and aes50 networking featuring klark teknik supermac technology
Hide thumbs Also See for Digital Snake S16:
Table of Contents

Advertisement

16
DIGITAL SNAKE S16
DIGITAL SNAKE S16 Controls
(1)
(2)
(13)
(14)
(15)
(16)
(17)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(12)
(18)
17
Quick Start Guide
Step 2: Controls
(EN)
(1) PHANTOM LEDs light when the 48V button is
engaged for a particular channel.
(2) MIDAS-designed mic/line inputs accept
balanced XLR male plugs.
(3) GAIN button, when pressed and held,
displays the currently selected mic input's
gain setting, which may then be adjusted
(11)
using the SELECT/ADJUST knob.
(4) DISPLAY shows the selected channel number,
its gain setting, or the sample rate in
Snake Master configuration.
(5) NETWORK LINK LEDs light red to indicate
the AES50 ports are connected but not
synchronized, and light green to indicate
they are connected and synchronized.
(6) 48 V button sends phantom power to the
currently selected mic input, indicated by a
lit button when active.
Paso 2: Controles
(ES)
(1) Los pilotos PHANTOM se iluminan cuando el
botón 48V está activo en un canal concreto.
(2) Entradas de micro/línea diseñadas por
MIDAS que aceptan conectores XLR
balanceados macho.
(3) Cuando mantenga pulsado el botón GAIN la
unidad le mostrará el ajuste de ganancia para
la entrada de micro elegida, que podrá ajustar
después con el mando SELECT/ADJUST.
(4) La PANTALLA le muestra el número del
canal activo, su ajuste de ganancia o la
frecuencia de muestreo en la configuración
Snake Master.
(5) Los pilotos NETWORK LINK se iluminan en
rojo para indicarle que los puertos AES50
están conectados pero no sincronizados, y en
verde para indicarle que están conectados
y sincronizados.
(6) El botón 48 V hace que sea enviada
alimentación fantasma a la entrada de micro
elegida, indicada por el botón iluminado
cuando está activa.
(7) STATUS LEDs show the operation mode
XLR outputs accept balanced XLR
(12)
of various features. See the Operation
female plugs.
Mode Chart for details. The HA LOCKED LED
POWER switch turns the unit on and off.
(13)
indicates that preamp gain adjustment
has been blocked by the controlling X32.
USB input accepts a USB type-B plug for
(14)
To unlock, open the X32 Setup/Global
firmware updates via PC.
page and un-check the General Preference
AES50 ports allow connection to a SuperMAC
(15)
'Lock Stagebox'.
digital mulitchannel audio network via
(8) CONFIG button, when pressed and held,
Ethernet cable. This allows connection
allows the device's operation mode to be
to digital mixers or cascading of multiple
adjusted by the SELECT/ADJUST knob.
S16 units.
(9) SELECT/ADJUST knob scrolls through the
ULTRANET port sends 16 channels to a
(16)
16 channels, adjusts the gain of the currently
Behringer P-16 personal monitoring system.
selected input, and changes the operating
ADAT OUT jacks send AES50 channels
(17)
mode. Push repeatedly to scroll Inputs,
17-32 to external equipment via optical
Outputs, P16 channels, ADAT outputs,
cable, or split the local 16 inputs for direct
and Stage (only in Snake Master mode).
ADAT recording.
LED METER displays the signal level of the
(10)
MIDI IN/OUT jacks accept standard 5-pin
(18)
currently selected channel.
MIDI cables for MIDI communication to and
MONITORING LEVEL knob adjusts the level of
from an X32 console.
(11)
the PHONES output.
(7) Los pilotos STATUS muestran el modo
Salidas XLR que aceptan conectores
(12)
operativo de distintas funciones. Vea la
XLR hembra.
tabla de Modo operativo para más detalles.
El interruptor POWER le permite encender y
(13)
El piloto HA LOCKED indica que el ajuste de
apagar la unidad.
ganancia de previo ha sido bloqueado por
el X32 de control. Para desbloquearlo, abra
Entrada USB que acepta conectores USB
(14)
la página Setup/Global del X32 y quite la
de tipo B para actualizaciones de firmware
marca de la opción 'Lock Stagebox' de las
vía PC.
preferencias generales.
Puertos AES50 que permiten la conexión a
(15)
(8) Cuando mantenga pulsado el botón CONFIG
una red audio multicanal digital SuperMAC a
podrá ajustar el modo operativo de esta
través de un cable Ethernet. Esto le permite
unidad con el mando SELECT/ADJUST.
la conexión a mesas de mezclas digitales o la
conexión en cascada de varias unidades S16.
(9) El mando SELECT/ADJUST le permite
pasar por los 16 canales, ajustar la
Puerto ULTRANET que permite el envío de
(16)
ganancia de la entrada elegida y
16 canales a un sistema de monitorización
cambiar el modo operativo. Púlselo
personal Behringer P-16.
varias veces para ir pasando entre las In
La salida ADAT OUT envía los canales AES50
(17)
(entradas), Out (salidas), P (canales P16),
17-32 a una unidad externa a través de un
A (salidas ADAT) y St (opción "stage", solo en
cable óptico, o divide las 16 entradas para
el modo Snake Master).
grabación ADAT directa.
Este MEDIDOR le muestra el nivel de la señal
(10)
Tomas MIDI IN/OUT que aceptan cables MIDI
(18)
del canal activo.
de 5 puntas standard para la comunicación
El mando MONITORING LEVEL le permite
MIDI a y desde una mesa X32.
(11)
ajustar el nivel de la salida PHONES.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents