Connect A Computer To The Extender With An Ethernet Cable - NETGEAR WN2500RP User Manual

Connect a Computer to the Extender with an Ethernet
Cable
CAUTION:
Do not use an Ethernet cable to connect the extender to a router. If you do
so, the extender does not work because it is designed to use only a
wireless connection to the router.
You can use the LAN ports on the extender to connect wired devices such as
Ethernet-enabled gaming consoles, printers, or computers.
Before you connect wired devices or computers, first install and set
Note:
up your extender as described in the Universal Dual Band WiFi
Range Extender WN2500RP Installation Guide that came in the
package.

To cable a computer to the extender:
Locate the four LAN ports on the rear panel of the extender..
1.
Use an Ethernet cable to connect your computer to one of these LAN ports.
2.
Connect the extender power adapter, and plug it into an electrical outlet.
3.
Log in as described in the following section.
4.
Universal Dual Band WiFi Range Extender WN2500RP
Getting Started
9