HP Compaq 320 Maintenance And Service Manual page 102

Description
●
33.8-cm (13.3-in) HD BrightView display assembly for use in computers with WLAN and
without webcam (1366×768 resolution), red
●
33.8-cm (13.3-in) HD BrightView display assembly with LED back lighting for use in
computers with WLAN and webcam (1366×768 resolution), red
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the palm rest (see
7. Remove the keyboard (see
8. Remove the top cover (see
Remove the display on 39.6-cm (15.6-in) computers:
1. Orient the computer in its normal position, face up with the display open as far as it will
comfortably go.
CAUTION:
support the display assembly can result in damage to the display assembly and other computer
components.
2. Disconnect the display cable (1) and the microphone cable (2) from the system board.
94 Chapter 4 Removal and replacement procedures
Battery on page
Service door on page
Palm rest on page
Keyboard on page
Top cover on page
Support the display assembly when removing the retaining screws. Failure to
56).
56).
73).
78).
82).
Spare part number
616599-001
616600-001