HP Compaq 8710w Quickspecs page 14

QuickSpecs
Memory
667-MHz DDR2 SDRAM
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 1024 MB, 2048 MB
Standard Memory Standard Memory Standard Memory Standard Memory
Optional Memory Optional Memory Optional Memory Optional Memory
Upgrades Upgrades Upgrades Upgrades
Up to Up to Up to Up to
1024 MB
2048 MB
4096 MB
NOTE: NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some third- NOTE: NOTE:
party memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If you mix memory
speeds, the system will perform at the lower memory speed. Above 3-GB, all memory may not be available due to system resource
requirements.
Memory Upgrades Memory Upgrades Memory Upgrades Memory Upgrades
1024 MB (1024 MB x 1)
2048 MB (2048 MB x 1 or 1024 MB x 2)
4096 MB (2048 MB x 2)
Support for up to 4096 MB of memory with the installation of optional DDR2 SDRAM memory kits. Both
memory slots are user accessible. Please refer to the Hardware and Software Guide for installation
procedures. Maximized dual-channel performance requires SODIMMs of the same size and speed in
both memory slots.
HP 512-MB (DDR2 667 MHz) SODIMM
HP 1024-MB (DDR2 667 MHz) SODIMM
HP 2048-MB (DDR2 667 MHz) SODIMM
DA - 12731 North America — Version 3 — May 22, 2007
HP Compaq 8710w Mobile Workstation HP Compaq 8710w Mobile Workstation HP Compaq 8710w Mobile Workstation HP Compaq 8710w Mobile Workstation
Slot 1 Slot 1 Slot 1 Slot 1
1024 MB
1024 MB
2048 MB
Slot 2 Slot 2 Slot 2 Slot 2
Empty
1024 MB
2048 MB
EM993AA
EM994AA
EM995AA
Page 14