HP EliteBook 2530p Quickspecs page 44

QuickSpecs
Technical Specifications
Material Usage
DA - 13101 North America — Version 17 — October 30, 2009
This HP product is designed to comply with the Waste Electrical and Electronic
Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the Gold
level, see: www.epeat.net
Keyboard complies with ISO standard: ISO 9995, EN 29241-4, and ISO/IEC
15412
Input devices of this product comply with ISO 9241, part 9.
Plastics parts weighing over 25 grams used in the product are marked per ISO
11469 and ISO1043.
This product contains 0% recycled materials (by wt.)
This product is greater than 91.8% recycle-able when properly disposed of at
end of life.
Packaging Materials
External:
Polyethylene low density 13 g
Internal:
Corrugated 458 g
EPE-Expanded Polyethylene 64 g
The EPE foam packaging material is made from 100% recycled content.
The corrugated paper packaging materials contains at least 80%
recycled content.
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN
6120 standards.
This product does not contain any of the following substances in excess of
HP EliteBook 2530p Notebook PC
Page 44