HP Compaq 6715s Quickspecs page 10

QuickSpecs
Memory
Support for up to 4096 MB of 667-MHz DDR2 SDRAM
Two DIMM slots
DIMM sizes supported: 512 MB, 1024 MB, and 2048 MB
Standard Memory Standard Memory
Standard Memory Standard Memory
Optional Memory Optional Memory Optional Memory Optional Memory
Upgrades Upgrades Upgrades Upgrades
Up to Up to Up to Up to
1024 MB
1024 MB
1536 MB
2048 MB
Memory Upgrades Memory Upgrades Memory Upgrades Memory Upgrades
512 MB (512 MB x 1)
1024 MB (1024 MB x 1 or 512 MB x 2)
2048 MB (2048 MB x 1)
Support for up to 4096 MB of memory is available (with the installation of optional DDR2 SDRAM
memory kits). Both memory slots are user accessible. Please refer to the Hardware and Software Guide
for installation procedures. Maximized dual-channel performance requires SODIMMs of the same size
and speed in both memory slots.
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry NOTE:
NOTE: NOTE:
standard nature of some third-party memory modules, we strongly recommend using only HP branded
memory modules to ensure compatibility. If you mix memory speeds, the system will perform at the lower
memory speed. Full availability of 4 GB of memory requires Windows Vista Business 64-bit or Linux.
With Windows 32-bit operating systems, the amount of usable memory is dependent upon your
configuration, so that above 3 GB all memory may not be available due to system resource
requirements.
HP 512-MB (DDR2 667 MHz) SODIMM
HP 1024-MB (DDR2 667 MHz) SODIMM
HP 2048-MB (DDR2 667 MHz) SODIMM
DA - 12688 EMEA — Version 12 — February 12, 2008
Slot 1 Slot 1 Slot 1 Slot 1
1024 MB
512 MB
1024 MB
2048 MB
HP Compaq 6715s Notebook PC HP Compaq 6715s Notebook PC HP Compaq 6715s Notebook PC HP Compaq 6715s Notebook PC
Slot 2 Slot 2 Slot 2 Slot 2
Empty
512 MB
512 MB
Empty
EM993AA
EM994AA
EM995AA
Page 10