Network Setup Summary - HP 530 Management Manual

Network Setup Summary

Accessed through the Network Setup sash, the Network Setup screen displays
the Ethernet and radio features within the network setup group.
Figure 4-11. The Network Setup Summary Screen
The Network Setup screen summarizes:
Ethernet: details basic Ethernet parameters.
■
• Connection Type: Indicates the type of connection.
• MAC Address: The physical layer address for the Ethernet port
interface.
• IP Address: IP address of this device.
• Subnet: Subnet mask of this device.
• Gateway: Gateway address of this device.
■ Radio One / Two: details basic Radio One & Two parameters.
• Status: Indicates if the radio is up or down.
• MAC Address: The physical layer address.
• Mode: Displays the radio mode for Radio One (IEEE 802.11b or IEEE
802.11g).
• Channel: Displays the channel on which the access point is currently
broadcasting.
• Max Tx Power: Displays the maximum radio power level for the
selected mode in dBm.
■ WLAN / SSID / VLAN ID / Security: details basic WLAN parameters.
• WLAN: Indicates the WLAN identifier. There can be up to 16 WLANs.
• SSID: Indicates the Service Set Identifier (SSID) for the WLAN.
• VLAN ID: Indicates the VLAN the WLAN is operating on.
• Security: Indicates the configured security for the WLAN.
Using the ProCurve Web Browser Interface
Web Interface Screens
4-19