Cli: Performing Configuration File Commands - HP 530 Management Manual

File Uploads, Downloads, and Resets
Transferring Configuration Files
A-10
4. Enter IP Address, File Name, Username, and Password for the server details
Click [Update] to perform the upload or download operation.
5.
To Reset A Configuration:
1. Select Management> System Maintenance > Configuration Files tab.
2. To reset the configuration back to the factory default configuration, click
[Reset] on the Reset to Factory Default option.
3. To reset the configuration back to the custom default configuration, click
[Reset] on the Reset to Custom Default option.

CLI: Performing Configuration File Commands

CLI Commands Used in This Section.
Command
Copy Commands:
copy <ftp | scp | tftp> <flash | startup-config> <ip> <file> [user-name
<user> password <pass>]
write <memory>
copy startup-config <ftp | scp | tftp> <flash | startup-config> <ip> <file>
[user-name <user> password <pass>]
copy factory-default <startup-config | custom-default>
copy running-config<startup-config | custom-default>
Erase/Reset Commands:
erase
reload
Show Commands:
write <terminal>
show config
show custom-default
show running-config
CLI Reference Page
9-51
9-55
9-52
9-53
9-53
9-54
9-14
9-55
9-56
9-58
9-60