Wireless Distribution System (WDS)
The WDS commands supported by the access point are listed below.
Command
Function
description
Establishes the WDS link description
disable
Disables the WDS link.
enable
Establishes the WDS link.
radio-used
Sets the radio that will be used by this WDS link.
remote-mac
Sets the mac address for the remote connection to
the access point.
show wds
Displays WDS link information.
wds-ssid <ssid>
Establishes the SSID name for this WDS link.
wep-key
Sets wds security key for the wireless connection.
wep-key-ascii
Sets wds security to ascii format.
wep-key-length
Sets wds security key length.
wpa-pre-shared-
Sets wds pre-shared key.
key
description (wds)
This command creates a human-readable string description of this WDS.
Syntax
description <string>
string - Description of the WDS.
•
Default Setting
N/A
Command Mode
WDS Interface Configuration
Command Line Reference
Wireless Distribution System (WDS)
Mode
IC-WDS
IC-WDS
IC-WDS
IC-WDS
IC-WDS
IC-WDS
IC-WDS
IC-WDS
IC-WDS
IC-WDS
IC-WDS
Page
9-160
9-160
9-160
9-161
9-162
9-162
9-161
9-163
9-164
9-164
9-165
9-159