Qos Commands - HP 530 Management Manual

Command Line Reference

QoS Commands

C A U T I O N
9-150

QoS Commands

The QoS commands supported by the access point are listed below.
The default WMM parameters settings are usually adequate for WMM opera-
tion. Incorrect WMM settings can adversely affect network performance.
Changes to WMM parameters should be reserved for someone with an
advanced knowledge of how WMM operates. For more on WMM, see the IEEE
802.11e standard.
Command Function
qos ap-params Configure QoS-related parameters on the device
<voice|video|best- for this radio
effort|background>
{<[aifs <aifs>] [cwmin
<swmin>] [cwmax
<cwmax>] [burst
<burst>]}
qos sta-params Configure QoS-related parameters on the
<voice|video|best- wireless stations.
effort|background>{<[a
ifs <aifs>] [cwmin
<swmin>] [cwmax
<cwmax>] [txop-limit
<txop-limit>]}
[no] qos wmm Enables using Wireless Multimedia Extensions
on this WLAN.
show qos Displays details about QoS settings on the device
and wireless client.
[no] rate-limit Configures the maximum rate at which the
<rate>
access point transmits multicast and broadcast
<burst>
traffic.
Mode Page
IC-R 9-151
IC-R 9-153
IC-R 9-155
IC-R 9-156
IC-R 9-156