Neighbor Ap Detection Commands; Ap-Detection - HP 530 Management Manual

Neighbor AP Detection Commands

The access point can be configured to periodically scan all radio channels and
find other access points within range. Alternatively, the access point can scan
continuously in a dedicated mode with no stations supported. A database of
nearby access points is maintained where detected APs can be identified.
Command Function
[no] ap-detection Enables the periodic or dedicated detection of
[dedicated] nearby access points

ap-detection

Sets the duration of the passive detection of
duration <value> nearby access points
ap-detection expire- Sets the time a dedicated AP remains on the AP
time <value> list after its last received beacon.
ap-detection interval Sets the wait time between scans when
<value> performing periodic (passive) scanning.
ap-detection max- Sets the maximum amount of entries of the
entries <value> detected APs on the detected AP list.
show detected-ap Shows the current configuration for AP
detection
ap-detection
This command enables the background detection of nearby access points. The
no command disables AP detection by this radio.
Syntax
ap-detection [dedicated]
no ap-detection
[dedicated] - Dedicate this radio to be used for continuous AP detec-
•
tion. This radio will not be able to service wireless stations or WDS
links if it is dedicated to AP-detection. The no version of this
command is not available for this parameter.
Default Setting
Disabled
Command Line Reference

Neighbor AP Detection Commands

Mode
IC-R
IC-R
IC-R
IC-R
IC-R
MC
Page
9-137
9-138
9-138
9-139
9-139
9-140
9-137