Disable (Wireless); Show Radio - HP 530 Management Manual

disable (wireless)

This command disables either the radio, ssid, or wds interfaces.
Syntax
disable
Default Setting
N/A
Command Mode
Radio Interface Configuration
WDS Interface Configuration
WLAN Interface Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# disable
ProCurve Access Point 530(radio1)#

show radio

This command displays detailed information about the radio.
Syntax
show radio [<radio>]
• radio - Display detailed information about the specified radio.
Default Setting
N/A
Command Mode
Manager Exec
Command Line Reference
Wireless Interface Commands
9-117