Command Levels; Manager Exec Level; Global Configuration Level - HP 530 Management Manual

Using the Command Line Interface (CLI)
Using the CLI
3-8

Command Levels

1. Manager Exec Level

Figure 3-2. Access Sequence for Command Levels
Configuration commands on the Access Point 539 are grouped into three
levels:

Manager Exec Level

Manager Exec level allows you to examine the current configuration, perform
basic system-level actions, reset the access point, and move to the configura-
tion access levels. The prompt for the Manager Exec level contains only the
system name and the "#" delimiter. For example:
ProCurve Acess Point 530 #

Global Configuration Level

Global Configuration level gives access to commands for configuring the
access point's software features, plus all the commands available at the lower
Manager Exec level (except for the "configure [terminal]" command).
To enter this level, enter the configure command at the Exec prompt. The
prompt for this level adds the word "(config)" before the "#" delimiter. For
example:
ProCurve Acess Point 530# configure
ProCurve Acess Point 530(config)#

2. Global Configuration Level

3. Context Configuration Level
Interface & WDS Levels
Radio Level:
WLAN Sub Configuration