Show Interface - HP 530 Management Manual

Command Line Reference
Ethernet Interface Commands
9-98
show ip
Default Setting
N/A
Command Mode
Manager Exec
Example
ProCurve Access Point 530# show ip
IP Address Information:
System Host Name
IP Address
Subnet Mask
Default Gateway
DHCP Client
DNS Information (Obtained from DHCP):
Domain Name Suffix
Primary DNS Server
Secondary DNS Server 216.148.227.00
ProCurve Access Point 530

show interface

This command displays the status for the Ethernet interface.
Syntax
show interface <interface>
• interface - Display detailed information about the specified interface.
i.e. ethernet
Default Setting
N/A
Command Mode
Manager Exec
ProCurve-AP-530
192.168.1.2
255.255.255.0
192.168.1.253
Enabled
example.ca.example.net.
204.127.202.0